|
|
.jpg)
| Pagina principalTanques y accesoriosVetus Rigid Tank For Waste Water |
Vetus Rigid Tank For Waste Water £271.49
 The high-grade linear polythene materials used are the same as all other rigid VETUS tanks and they are available with capacities of 40, 60 or 88 litres. The centre point for an SAE flange gauge sender is incorporated in the moulding together with 5 blind bolt holes. The relevant gauge sender should be ordered separately and the appropriate hole cut in the tank. These tanks will save considerable installation time! Each tank is supplied with the following connections: -Fixed hose connector ø 19 mm for the breather line. -Rotating hose connector ø 38mm with pick-up pipe, for waste water suction. -A Ø 42 mm hole is provided for easy installation of an inlet fitting, type RT..B. This should be ordered separately according to the inlet hose diameter. If required, additional inlet fittings may also be installed. These tanks come complete with a screw down inspection lid installed. Provided with ISO 8099 identification. 40ltr Spec: 472(l) x 373(h) x 362(w) mm 60ltr Spec: 682(l) x 373(h) x 362(w) mm 88ltr Spec: 892(l) x 373(h) x 362(w) mm Sold Individually.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|