Gael Force Multi-Purpose Metallic Primer De £20.45

Before you apply it:

• The surface should be stable, firm, dry and free of dust, sand, loose old paint, dirt, grease, oil and salt.
• Abrade any new bare GRP with 180-220 grit, removing residual hull release agent.
• Ensure steel is free of rust (grit blast where possible)
• Ensure wood is dry and sound
• Ensure ferro-cement, lead and aluminium are free of corrosive deposits and lightly abraded.
• Previously antifouled surfaces in good condition: remove any loose material and lightly abrade using plenty of fresh water.

How to apply it:

1. Stir product well before use.
2. Apply 1 or 2 coats by roller, brush, or spray allowing 3-6 hours between coats depending on temperature.
3. If a filler is necessary, apply 1 coat of primer first.

* The coverage has been calculated for the stated volume solids and dry film thickness. A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate, and the relevant consumption factor. The physical constants are subject to normal manufacturing tolerances.