Have a question? Send a message along with your email address we'll notify you when we reply which is usually within 20 minutes. This facility is operational between the hours of 8am and 5pm, Monday to Friday. Messages sent outwith office hours will be answered at the next available opportunity within office hours.
Postage to United Kingdom on this item is from £5.99
FREE UK Delivery Over £120*
Price Match Request
Rule LoPro Series Bilge Pumps are designed to bring pumping power to tight spaces. Multiple modes of operation provide flexibility for a variety of applications.
Connections: For 19mm (3/4"), 25mm (1") or 28mm (1 1/8") bore hose.
Dimensions: 237mm long, 59mm diameter.
Current Draw: 4(amps)
Fuse Size: 7.5 amp
Output: Up to 56 litres/minute (12.5 gallons/minute). Max. recommended discharge head 3m
Brings Rule pumping power to tight spaces.
Fully rotating discharge body for installation flexibility.
Choice of discharge ports supplied with each pump.
Horizontal or Vertical Mounting
3 Operation Modes:
High water mode; The pump starts when the water level reaches 50mm (2")
Low water mode; Turn the motor cartridge 180º and the sensor is at 33mm (1.3")
Full Electronic mode; The pump automatically turns on every 2.5 minutes to check for water, if water is detected the pump runs until the water is gone.
I can't fault the automatic rule Bilge pumps I've got two. of them of ye before. I've ordered two more for friends of mine. Who want me to install them its the manual ones I received I'm hoping I'll have them soon my friends are running out of patience.