Peelaway Marine Antifouling Remover  £93.99

• Peelaway Marine is specially formulated to effectively remove multiple layers of anti-foul coatings with one application
• Saves time by reducing the need for repeated scraping
• A light paste consistency and is easy to apply to vertical surfaces and difficult shapes
• Can be applied with a brush or towel and for larger areas an airless sprayer can be used
• Always carry out a test patch before general application
• 1kg does up to 4m2 and 20-50% further reduction when using airless spray
• Comes with one blanket that can be cut to specific sizes as required..

Directions

• Step 1 - Test Patch: It is essential to apply a test patch to the area that will be stripped. This will indicate the dwell time required and the thickness of the paste to be applied
• Step 2 - Application: Apply evenly with an airless spray, brush or trowel. Ensure that raised edges and corners are covered well and then apply a second coat to the final tested thickness. Then lay on the poultice with printing facing outwards, gently rubbing to exclude trapped air bubbles. Work in manageable areas which can be removed within the time scale
• Step 3 - Removal: Slide the scraper into the paste and paint, keeping the paint, paste and cover together as much as possible. Take care not to gouge/scratch the gel coat. Once the removal is complete, any remaining residues of Peelaway© Marine must be washed away. Allow the cleaned surface to dry thoroughly before re-coating