There are 3 reviews with an average rating of
1.00
Value for money- NIL
Mine leaked from 1st use, corroded between the pump and motor, resulting in major metal loss and failure. All after around total of @20 minutes use over a few months.
After sales takes months without resolvement, they quoted sand and debris in pump, when the pump was already checked, filters were clean and has not been fed by inlet in shallow water.
Poor quality, failed in no time-xylem after sales care-non existant - jumped up report, not correct
If yours fails- forget about aftersales guarantee!
The number for after sales at xylem doesn't dial- can't get in touch with them or by email
Bye Bye money
Marine grade!- Ha
.jpg)
12v DC Model Specification (23680-4003) Water Puppy self-priming pump 12 volt d.c. Connections for 25mm (1”) bore hose or use ½” hose adapters. Connections: for 25mm (1”) bore hose or ½” BSP Dimensions: 195mm long, 120mm wide, 75mm high Fuse Size: 15 amp Output: up to 32 litres/minute (6.5 gallons/minute) Medium duty, continuously rated bilge and deckwash pump. Self-priming up to 1.2m vertical lift Simple design with few wearing parts. Can generate pressures up to 0.4 bar (6psi) Bronze body, stainless steel shaft Packaged Dimensions: L:22 x H:9 x W:13cm Actual Weight: 3.22 Kg
