Wire Rope Grip manufactured in Stainless Steel.
Information:
- Prior to fitting, the threads of nuts and 'u' bolts should be well-greased.
- The spacing between the grip should be at least 6 times the diameter of the rope.
- Ensure the grips are correctly oriented. The 'u' bolt should always be placed on the unloaded end of the rope.
- Tighten each nut evenly and in turn to achieve the recommended setting.
- Leave unused for 24 hours and check torque setting again. In some cases, a 50% loss of torque has been recorded over this period. Re-tighten to the correct torque.
- After the first application of the load, check the torque setting again and reset it, if necessary.
- During service, ensure periodic checking of the torque setting.
SOLD IN: each.
Nominal Rope Diameter
(mm) |
A
(mm) |
B1
(mm) |
B2
(mm) |
D
(mm) |
H1
(mm) |
H2
(mm) |
I
(mm) |
Weight
(kgs/100) |
| 2 |
16 |
4 |
10 |
M3 |
17 |
10 |
17 |
1.0 |
| 3 |
10 |
5 |
10 |
M4 |
21 |
10 |
20 |
1.2 |
| 4 |
13 |
6 |
11 |
M4 |
23 |
13 |
20 |
1.4 |
| 5 |
13 |
7 |
11 |
M5 |
26 |
11 |
23 |
1.6 |
| 6 |
16 |
8 |
13 |
M5 |
30 |
11 |
26 |
2.0 |
| 8 |
19 |
10 |
14 |
M6 |
36 |
16 |
30 |
3.8 |
| 10 |
21 |
12 |
18 |
M8 |
44 |
16 |
34 |
6.4 |
| 13 |
28 |
15 |
23 |
M10 |
56 |
22 |
41 |
13.6 |
.jpg)
