Postage to United Kingdom on this item is from £6.99
Description
How To Use
Reviews (1)
The Aqua-Zorb water-free cell has been specially formulated to separate and extract water from fuels in tank bottoms.
Suitable for use with diesel fuel, petrol fuel, aviation fuel, kerosene, and heating oils. Each cell comes with a 5 metre (longer if required) metallic woven anti-static retrieval line and easy to follow instructions. The outer cover is made from stop-rip nylon material filled with a super-absorbent polymer that extracts water from fuel without contamination. The cell sits in the fuel tank bottom and absorbs the water. Remove the cell - remove the water!
Features:
Two sizes to suit various tank sizes.
Comes with a metal bar to help keep the fuel cell on the bottom of the tank where water will be.
The static line attached for removal is interwoven with a metal wire for static electricity protection.
Can be removed and replaced to monitor progress.
Does not require specialist disposal.
Can be used in any type of tank containing petrol, diesel or heating oil.
And don't worry, it does not invalidate the engine warranty.
How it works:
Choosing the cell size: When determining the size of the cell that you require for your application, ensure that you are aware of the diameter of the opening of the tank that is to house the cell. Once the cell has absorbed the water from your tank, the swollen size of the spent cell will need to fit through this opening to be extracted from the tank. Once you know your tank's opening dimensions, we can recommend the best size cell for your application. Cells are currently available to fit a minimum opening of 38mm.
Insert the cell to your tank: Lower the cell into your tank and leave it resting on the tank bottom where it will start to absorb the free water. The retrieval cord must be securely fastened to enable easy removal of the cell, preferably inside the cap or tank lid.
Operating Instructions: Once in your tank, you don't need to do much, as the cell will do its own thing and absorb the free water. You will need to periodically lift the cell to the surface of the tank to check the swollen size of it and once full you'll need to remove it from the tank and replace with a new cell. Both the insertion and removal method is made easy with stainless steel tank rods and fasteners, complete with a strong anti-static retrieval line.
Future Water Prevention: Once all of the free water has been removed from your tank, fit a new cell to absorb any future ingress of water. Also once the free water has been removed consider giving the fuel a polish to remove any remaining dissolved water and dirt.
There are 1 reviews with an average rating of 5.00
We have recently used Aqua-zorb water free cells in tanks at two of our customer's sites. The sites were both marinas and therefore the tanks were exposed to water ingress and difficult to access. We found that the cells were quick and easy to install, removing the need for specialist access equipment to enter the tank. After a period of time, we inspected the tanks and found that the water contamination within the tanks had been absorbed into the cells as promised.
.jpg)
