Options
If the angle between the halyard and the spar is less than 10 degrees, it is recommended to add either:
|
S Series 406 S
Delrin twin ball bearing races in both drum and halyard swivel. All components are polyarylamide.
|
T Series 406 T
Uses the same materials as the S series but has a double groove allowing the use of hollow twin groove forestay. It also makes it possible to set twin headsails rather than hoisting a spinnaker.
|
S Series 608 S
608 S Twin ball bearing races, alternating Delrin and Stainless Steel. Stemhead brackets with adjustable width. Drum cheeks swivel thro' 360º. By providing the best angle the drum cheeks prevent chaffing and snagging.
|
T Series 608 T
Uses the same materials as the S series but has a double groove allowing the use of hollow twin groove forestay. It also makes it possible to set twin headsails rather than hoisting a spinnaker.
|
S Series 810 S
Chainplates are fully adjustable in order to adapt to either chainplate or turnbuckle mounting. Tough Torlon balls alternating with Delrin balls, ensuring even smoother drum rotation.
|
T Series 810 T
Uses the same materials as the S series but has a double groove, allowing the use of hollow twin groove forestay. It also makes it possible to set twin headsails rather than hoisting a spinnaker.
|
Jib Reefing For Boats 10-13m (33-42ft)
Alloy spars with hollow forestay shape and twin grooves, takedown drum and adjustable tack, allowing installation either on deck or in the chain locker
| |